Bootp - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

bootp

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
bootp {
client-response-ttl number;
description text-description;
interface interface-group {
client-response-ttl number;
description text-description;
maximum-hop-count number;
minimum-wait-time seconds;
no-listen;
server address {
<logical-system logical-system-name> <routing-instance
[ routing-instance-names ]>;
}
}
maximum-hop-count number;
minimum-wait-time seconds;
relay-agent-option;
server address {
<logical-system logical-system-name> <routing-instance
[ routing-instance-names ]>;
}
}
[edit forwarding-options helpers]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configures a router, switch, or interface to act as a Dynamic Host Configuration Protocol
(DHCP) or bootstrap protocol (BOOTP) relay agent.
DHCP relaying is disabled.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Routers, Switches, and Interfaces as DHCP and BOOTP Relay Agents
Setting Up DHCP Option 82 with the Switch as a Relay Agent Between Clients and
DHCP Server (CLI Procedure) on page 3150
Chapter 31: Configuration Statements for System Services
551