Layer 3 Protocols Not Supported On Ex Series Switches - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Table 20: Supported Junos OS Layer 3 Protocol Statements and Features (continued)
Protocol Notes
ICMP Fully supported.
IGMPv1, v2 and v3 Fully supported.
IS-IS Supported, with the exceptions noted in "Layer 3
Protocols Not Supported on EX Series Switches" on
page 18.
MLD Supported on EX3200, EX4200, and EX8200
switches (MLD versions 1 and 2).
MPLS Supported, with the exceptions noted in "Layer 3
Protocols Not Supported on EX Series Switches" on
page 18.
OSPFv1, v2 and Supported, with the exceptions noted in "Layer 3
v3 Protocols Not Supported on EX Series Switches" on
page 18.
PIM Fully supported on EX3200, EX4200, and EX8200
switches.
RIP Fully supported.
RIPng Fully supported.
SNMP Fully supported.
VRRP Fully supported with exception of IPv6 support of
VRRP on routed VLAN interfaces (RVIs).
Related
Documentation

Layer 3 Protocols Not Supported on EX Series Switches

18
®
OS for EX Series Ethernet Switches, Release 10.4
Layer 3 Protocols Not Supported on EX Series Switches on page 18
EX Series Switch Software Features Overview on page 3
EX Series switches do not support the Junos OS Layer 3 protocols and features listed in
Table 21 on page 19:
For More Information
Junos OS Routing Protocols Configuration
See the
Guide.
Junos OS Multicast Protocols
See the
Configuration Guide .
Junos OS Routing Protocols Configuration
See the
Guide.
Junos OS Multicast Protocols
See the
Configuration Guide .
Junos OS MPLS Applications
See the
Configuration Guide.
See the Junos OS Routing Protocols Configuration
Guide.
Junos OS Multicast Protocols
See the
Configuration Guide .
Junos OS Routing Protocols Configuration
See the
Guide.
See the Junos OS Routing Protocols Configuration
Guide.
Junos OS Network Management
See the
Configuration Guide.
See "Understanding VRRP on EX Series Switches"
Junos OS High Availability
on page 1172. See also the
Guide.
Copyright © 2010, Juniper Networks, Inc.