Show Configuration - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show configuration

Syntax
Release Information
Description
Options
302
®
OS for EX Series Ethernet Switches, Release 10.4
show configuration
<statement-path>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the configuration that currently is running on the router or switch, which is the
last committed configuration.
—Display the entire configuration.
none
—(Optional) Display one of the following hierarchies in a configuration.
statement-path
(Each statement-path
appropriate configuration guide or EX Series switch documentation for more
information.)
—Network access configuration.
access
—Access profile configuration.
access-profile
—Accounting data configuration.
accounting-options
—Applications defined by protocol characteristics.
applications
—Groups from which configuration data is inherited.
apply-groups
—Chassis configuration.
chassis
chassis network-services
—Class-of-service configuration.
class-of-service
diameter —Diameter base protocol layer configuration.
ethernet-switching-options
configuration.
event-options —Event processing configuration.
—Firewall configuration.
firewall
forwarding-options —Options that control packet sampling.
—Configuration groups.
groups
interfaces —Interface configuration.
—JSRC partition configuration.
jsrc
jsrc-partition —JSRC partition configuration.
—Logical system configuration.
logical-systems
poe —(EX Series switch only) Power over Ethernet configuration.
—Routing policy option configuration.
policy-options
protocols —Routing protocol configuration.
option has additional suboptions not described here. See the
—Current running mode.
—(EX Series switch only) Ethernet switching
Copyright © 2010, Juniper Networks, Inc.