Ex4500 Switch Models - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

For ex series ethernet switches
Table of Contents

Advertisement

Related
Documentation

EX4500 Switch Models

Table 25: EX4500 Switch Models, Components, and Supported Junos OS Release
Access Port
Model
Configuration
EX4500-40F-FB
40-port
GbE/10GbE
SFP/SFP+
EX4500-40F-BF
40-port
GbE/10GbE
SFP/SFP+
EX4500-40F-FB-C
40-port
(Converged
GbE/10GbE
Enhanced
SFP/SFP+
Ethernet (CEE)
capable)
Copyright © 2010, Juniper Networks, Inc.
CAUTION: Mixing different types (AC and DC) of power supplies or power
supplies with front-to-back and back-to-front airflow in the same chassis is
not supported.
EX4500 Switch Models on page 37
Field-Replaceable Units in EX4500 Switches
The EX4500 switch is available in five models. Table 25 on page 37 lists the models for
an EX4500 switch, the components included in each model, and the Junos OS release
in which they were introduced.
NOTE: The side of the switch where the network ports are located is the front
of the switch.
Direction of
Airflow
Switch Components
Front-to-back
Chassis
One fan tray (with green exhaust label visible)
One AC power supply (with green ejector lever)
One power cord
One power supply cover panel
Two uplink module cover panels
One intraconnect module
Back-to-front
Chassis
One fan tray (with orange intake label visible)
One AC power supply (with orange ejector lever)
One power cord
One power supply cover panel
Two uplink module cover panels
One intraconnect module
Front-to-back
Chassis
One fan tray (with green exhaust label visible)
One AC power supply (with green ejector lever)
One power cord
One power supply cover panel
Two uplink module cover panels
One intraconnect module
Chapter 2: Supported Hardware
Junos OS Release
10.2R1
10.2R1
10.3R1
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents