Chapter 31 Configuration Statements For System Services; Boot-File - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

CHAPTER 31
Configuration Statements for System
Services

boot-file

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
boot-file filename;
[edit system services dhcp],
[edit system services dhcp pool],
[edit system services dhcp static-binding]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For J Series Services Routers and EX Series switches only. Set the boot file advertised to
DHCP clients. After the client receives an IP address and the boot file location from the
DHCP server, the client uses the boot image stored in the boot file to complete DHCP
setup.
—The location of the boot file on the boot server. The filename can include a
filename
pathname.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the Router, Switch, or Interface to Act as a DHCP Server on J Series Services
Routers and EX Series Ethernet Switches
boot-server on page 550
549