Set Date - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

set date

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
set date set date
288
®
OS for EX Series Ethernet Switches, Release 10.4
set date (date-time | ntp <ntp-server> <source-address source-address>)
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Set the date and time.
—Date and time. Enter this string inside quotation marks.
date-time
ntp —Use a Network Time Protocol (NTP) server to synchronize the current date and time
setting on the router or switch.
—(Optional) Specify the IP address of one or more NTP servers.
ntp-server
source-address source-address
switch uses to contact the remote NTP server.
view
show cli on page 169
set date on page 288
When you enter this command, you are provided feedback on the status of your request.
user@host> set date ntp
21 Apr 17:22:02 ntpdate[3867]: step time server 172.17.27.46 offset 8.759252 sec
—(Optional) Specify the source address that the router or
Copyright © 2010, Juniper Networks, Inc.