Verifying Software Installation; Routine Monitoring; Verifying That Automatic Software Download Is Working Correctly - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

CHAPTER 7

Verifying Software Installation

Routine Monitoring

Verifying That Automatic Software Download Is Working Correctly

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
Routine Monitoring on page 101
Monitoring Licenses on page 102
Verifying That Automatic Software Download Is Working Correctly on page 101
Verifying That a System Snapshot Was Created on an EX Series Switch on page 102
Verify that the automatic software download feature is working correctly.
Use the
show system services dhcp client interface-name
automatic software download feature has been used to install a software package.
user@switch> show system services dhcp client ge-0/0/1.0
Logical Interface Name
Hardware address
Client Status
Vendor Identifier
Server Address
Address obtained
Lease Obtained at
Lease Expires at
DHCP Options :
Name: name-server, Value: [ 10.209.194.131, 2.2.2.2, 3.3.3.3 ]
Name: server-identifier, Value: 10.1.1.1
Name: router, Value: [ 10.1.1.80 ]
Name: boot-image,
Value: jinstall-ex-4200-9.6R1.5-domestic-signed.tgz
Name: boot-image-location,
Value: 10.1.1.25:/bootfiles/
The output from this command shows the name and location of the software package
under when automatic software download was last used to install a
DHCP options
software package. The sample output in
message to arrive on the DHCP client had a boot server address of
boot file named
jinstall-ex-4200-9.6R1.5-domestic-signed.tgz
ge-0/0/1.0
00:0a:12:00:12:12
bound
ether
10.1.1.1
10.1.1.89
2009-08-20 18:13:04 PST
2009-08-22 18:13:04 PST
DHCP options
command to verify that the
shows that the last DHCP server
and a
192.168.1.165
. If automatic software
101