Show System Reboot - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show system reboot

Syntax
Syntax (EX Series
Switch)
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show system reboot
<both-routing-engines>
show system reboot
<all-members>
<both-routing-engines>
<local>
<member member-id>
show system reboot
<all-chassis | all-lcc | lcc number | scc>
<both-routing-engines>
show system reboot
<all-chassis| all-lcc | lcc number | sfc number>
<both-routing-engines>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Display pending system reboots or halts.
none —Display pending reboots or halts on the active Routing Engine.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
all-chassis
display halt or reboot request information for all the T640 routers in the chassis that
are connected to the TX Matrix router. On a TX Matrix router, display halt or reboot
request information for all the T1600 routers in the chassis that are connected to
the TX Matrix Plus router.
—(EX4200 switches only) (Optional) Display halt or reboot request
all-members
information for all members of the Virtual Chassis configuration.
all-lcc —(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display system halt or reboot request information for all T640 routers (or line-card
chassis) connected to the TX Matrix router. On a TX Matrix Plus router, display halt
or reboot request information for all T1600 routers (or line-card chassis) connected
to the TX Matrix Plus router
—(Systems with multiple Routing Engines) (Optional) Display halt
both-routing-engines
or reboot request information on both Routing Engines.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
lcc number
display halt or reboot request information for a specific T640 router that is connected
to the TX Matrix router. On a TX Matrix Plus router, display halt or reboot request
information for a specific T1600 router that is connected to the TX Matrix Plus router.
Replace number with a value from
Chapter 17: Operational Commands for System Setup
0 through 3 .
311