Clear System Reboot - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

clear system reboot

Syntax
Syntax (EX Series
Switch)
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
246
®
OS for EX Series Ethernet Switches, Release 10.4
clear system reboot
<both-routing-engines>
clear system reboot
<all-members>
<both-routing-engines>
<local>
<member member-id>
clear system reboot
<both-routing-engines>
<all-chassis | all-lcc | lcc number | scc>
clear system reboot
<both-routing-engines>
<all-chassis | all-lcc | lcc number | sfc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Clear any pending system software reboots or halts. When issued on a TX Matrix router
without any options, the default behavior clears all pending system software reboots or
halts on all T640 routers connected to the TX Matrix router. When issued on a TX Matrix
Plus router without any options, the default behavior clears all pending system software
reboots or halts on all T1600 routers connected to the TX Matrix Plus router.
—Clear all pending system software reboots or halts.
none
all-chassis —(TX Matrix and TX Matrix Plus routers only) (Optional) Clear all halt or reboot
requests for all the Routing Engines in the chassis.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
all-lcc
clear all halt or reboot requests for all T640 routers (or line-card chassis) connected
to the TX Matrix router. On a TX Matrix Plus router, clear all halt or reboot requests
for all T1600 routers (or line-card chassis) connected to the TX Matrix Plus router.
all-members —(EX4200 switches only) (Optional) Clear all halt or reboot requests on all
members of the Virtual Chassis configuration.
—(Systems with multiple Routing Engines) (Optional) Clear all halt
both-routing-engines
or reboot requests on both Routing Engines. On a TX Matrix router, clear both Routing
Engines on all chassis connected to the TX Matrix router. Likewise, on a TX Matrix
Plus router, clear both Routing Engines on all chassis connected to the TX Matrix
Plus router.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
lcc number
clear all halt or reboot requests for a specific T640 router that is connected to the
TX Matrix router. On a TX Matrix Plus router, clear all halt or reboot requests for a
Copyright © 2010, Juniper Networks, Inc.