Ex4200 Switch Models; Power Over Ethernet (Poe) Ports; Table 24: Ex4200 Switch Models - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

Power over Ethernet (PoE) Ports

Related
Documentation

EX4200 Switch Models

Table 24: EX4200 Switch Models

Model Ports
EX4200-24T 24 Gigabit Ethernet
EX4200-48T 48 Gigabit Ethernet
EX4200-24P 24 Gigabit Ethernet
EX4200-48P 48 Gigabit Ethernet
EX4200-24F 24 small form-factor pluggable
(SFP) transceivers
EX4200-24T-DC 24 Gigabit Ethernet
EX4200-48T-DC 48 Gigabit Ethernet
EX4200-24F-DC 24 small form-factor pluggable
(SFP) transceivers
Related
Documentation
34
®
OS for EX Series Ethernet Switches, Release 10.4
PoE ports provide electrical current to devices through the network cables so that separate
power cords for devices such as IP phones, wireless access points, and security cameras
are unnecessary. EX4200 switches with an AC power supply installed have options of
full (all 24 or 48 ports) or partial (8 ports) PoE capability. EX4200 switches with a DC
power supply installed do not provide PoE.
Full PoE models are primarily used in IP telephony environments. Partial PoE models are
used in environments where, for example, only a few ports for wireless access points or
security cameras are required.
EX4200 Switch Models on page 34
Field-Replaceable Units in EX4200 Switches
Site Preparation Checklist for EX4200 Switches
The EX4200 switch is available with 24 or 48 ports and with partial or full Power over
Ethernet (PoE) capability. EX4200 switches with a DC power supply installed do not
provide PoE. Table 24 on page 34 lists the EX4200 switch models.
Number of PoE-enabled Ports
First 8 ports
First 8 ports
All 24 ports
All 48 ports
–
0
0
–
Front Panel of an EX4200 Switch
Rear Panel of an EX4200 Switch
EX4200 Switches Hardware Overview on page 32
Power Supply
(Minimum)
320 W
320 W
600 W
930 W
320 W
190 W
190 W
190 W
Copyright © 2010, Juniper Networks, Inc.