Table 63: Show System Switchover Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Additional Information
Required Privilege
Level
List of Sample Output
Output Fields

Table 63: show system switchover Output Fields

Field Name Field Description
Display graceful Routing Engine switchover status:
Graceful switchover
Configuration database State of the configuration database:
328
®
OS for EX Series Ethernet Switches, Release 10.4
display graceful Routing Engine switchover information for all T1600 routers (or
line-card chassis) connected to the TX Matrix Plus router.
—(TX Matrix and TX Matrix Plus router only) (Optional) On a TX Matrix router,
lcc number
display graceful Routing Engine switchover information for a specific T640 router
(or line-card chassis) connected to the TX Matrix router. On a TX Matrix Plus router,
display graceful Routing Engine switchover information for a specific T1600 router
(or line-card chassis) connected to the TX Matrix Plus router.Replace
.
0
scc —(TX Matrix router only) (Optional) Display graceful Routing Engine switchover
information for the TX Matrix router (or switch-card chassis).
—(TX Matrix Plus router only) (Optional) Display graceful Routing Engine switchover
sfc
information for the TX Matrix Plus router (or switch-fabric chassis).
If you issue the
show system switchover
the command is broadcast to all the T640 backup Routing Engines that are connected
to it.
Likewise, if you issue the show system switchover
Routing Engine, the command is broadcast to all the T1600 backup Routing Engines that
are connected to it.
view
show system switchover (Backup Routing Engine) on page 329
show system switchover all-lcc (Routing Matrix) on page 329
Table 63 on page 328 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
—Indicates
On graceful-switchover
—Indicates
Off graceful-switchover
—Configuration database has synchronized.
Ready
—Configuration database is synchronizing. Displayed when there are updates within
Synchronizing
the last 5 seconds.
—Configuration database synchronize process failed.
Synchronize failed
command on a TX Matrix backup Routing Engine,
command on a TX Matrix Plus backup
show system switchover
is specified for the
routing-options
is not specified for the
routing-options
Copyright © 2010, Juniper Networks, Inc.
with
number
command.
configuration command.
configuration command.