Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 228

Complete Software Guide for Junos
124
®
OS for EX Series Ethernet Switches, Release 10.4
—File Transfer Protocol.
ftp
Use
ftp://hostname/pathname/package-name
credentials, use
ftp://<username>:<password>@hostname/pathname/package-name
the system prompt you for the password, specify
password. If a password is required, and you do not specify the password or
prompt , an error message is displayed.
—Hypertext Transfer Protocol.
http
Use
http://hostname/pathname/package-name
credentials, use
http://<username>:<password>@hostname/pathname/package-name
password is required and you omit it, you are prompted for it.
—Secure copy (available only for Canada and U.S. version).
scp
Use scp://hostname/pathname/package-name
credentials, use
scp://<username>:<password>@hostname/pathname/package-name
NOTE:
The
pathname
directory on the remote system and not the root directory.
On a J Series Services Router, when you install the software from a
remote location, the package is removed at the earliest opportunity in
order to make room for the installation to be completed. If you copy
the software to a local directory on the router and then install the new
package, use the
the installation to be completed.
—(Optional) Activate a partial load and treat parsing errors as warnings
best-effort-load
instead of errors.
delay-restart —(Optional) Install software package or bundle, but do not restart software
processes.
—(Optional) Force the addition of the software package or bundle (ignore warnings).
force
lcc number —(TX Matrix and TX Matrix Plus routers only) (Optional) In a routing matrix
based on the TX Matrix router, install a software package or bundle on a T640 router
(or line-card chassis) that is connected to the TX Matrix router. In a routing matrix
based on the TX Matrix Plus router, install a software package or bundle on a T1600
router (or line-card chassis) that is connected to the TX Matrix Plus router. Replace
with a value from
number
—(TX Matrix routers only) (Optional) Install a software package or bundle on a Routing
scc
Engine on a TX Matrix router (or switch-card chassis).
. To specify authentication
. To specify authentication
. To specify authentication
in the protocol is the relative path to the user's home
option to achieve the same effect and allow
unlink
through .
0 3
Copyright © 2010, Juniper Networks, Inc.
. To have
in place of the
prompt
. If a
.