Table 131: Show Chassis Environment Routing-Engine Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Output Fields
show chassis show chassis
environment environment
routing-engine routing-engine
(Nonredundant) (Nonredundant)
show chassis
environment
routing-engine
(Redundant)
show chassis
environment
routing-engine (TX
Matrix Plus Router)
730
®
OS for EX Series Ethernet Switches, Release 10.4
Table 131 on page 730 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.

Table 131: show chassis environment routing-engine Output Fields

Field Name
Routing engine slot status
State
Temperature
user@host> show chassis environment routing-engine
Routing Engine 0 status:
State
Temperature
user@host> show chassis environment routing-engine
Route Engine 0 status:
State:
Temperature:
Route Engine 1 status:
State:
Temperature:
user@host> show chassis environment routing-engine
sfc0-re0:
--------------------------------------------------------------------------
Routing Engine 0 status:
State
Temperature
Routing Engine 1 status:
State
Temperature
lcc0-re0:
--------------------------------------------------------------------------
Routing Engine 0 status:
State
Temperature
Routing Engine 1 status:
State
Temperature
show chassis environment routing-engine
Field Description
Number of the Routing Engine slot:
Status of the Routing Engine:
Online Master —MCS is online, operating as Master.
—MCS is online, operating as Standby.
Online Standby
Temperature of the air flowing past the Routing Engine.
Online Master
27 degrees C / 80 degrees
Online Master
26 degrees C / 78 degrees F
Online Standby
26 degrees C / 78 degrees F
Online Master
26 degrees C / 78 degrees F
Online Standby
28 degrees C / 82 degrees F
Online Master
30 degrees C / 86 degrees F
Online Standby
29 degrees C / 84 degrees F
0 or 1 .
Copyright © 2010, Juniper Networks, Inc.