Table 100: Add An Authentication Server - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Table 99: User Management Configuration Page Summary (continued)
Field Function
Login Class (required) Defines the user's access privilege.
Password Specifies the login password for
this user.
Confirm Password Verifies the login password for this
user.

Table 100: Add an Authentication Server

Field Function
IP Address Specifies the IP address of the server.
Password Specifies the password of the server.
Confirm Password Verifies that the password of the server is entered
correctly.
Server Port Specifies the port with which the server is
associated.
Source Address Specifies the source address of the server.
Retry Attempts Specifies the number of login retries allowed after
a login failure.
Time out Specifies the time interval to wait before the
connection to the server is closed.
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Configuring Management Access for the EX Series Switch (J-Web Procedure) on
page 487
Chapter 24: User and Access Management Configuration
Your Action
Select the user's login class from the list:
operator
read-only
super-user/superuser
unauthorized
This list also includes any user-defined login classes.
Type the login password for this user. The login password must
meet these criteria:
The password must be at least 6 characters long.
It can include alphabetic, numeric, and special characters, but
not control characters.
It must contain at least one change of case or character class.
Retype the login password for this user.
Your Action
Type the server's 32-bit IP address, in dotted
decimal notation.
Type the password of the server.
Retype the password of the server.
Type the port number.
Type the server's 32-bit IP address, in dotted
decimal notation.
Type the number.
NOTE: Only 1 retry is permitted for a TACACS
server.
Type the interval in seconds.
493