[Edit Vlans] Configuration Statement Hierarchy - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

[edit vlans] Configuration Statement Hierarchy

Related
Documentation
72
®
OS for EX Series Ethernet Switches, Release 10.4
Example: Configuring an EX4200 Virtual Chassis Interconnected Across Multiple Wiring
Closets on page 932
Example: Configuring an EX4200 Virtual Chassis Using a Preprovisioned Configuration
File on page 952
Configuring an EX4200 Virtual Chassis (CLI Procedure) on page 981
Configuring an EX4200 Virtual Chassis (J-Web Procedure) on page 985
EX4200 Virtual Chassis Overview on page 891
vlans {
vlan-name {
description text-description;
dot1q-tunneling {
customer-vlans (id | native | range);
layer2-protocol-tunneling all | protocol-name {
drop-threshold number;
shutdown-threshold number;
}
}
filter input filter-name;
filter output filter-name;
interface interface-name {
mapping (native (push | swap) | policy | tag (push | swap));
pvlan-trunk;
}
isolation-id id-number;
l3-interface vlan.logical-interface-number;
mac-limit number;
mac-table-aging-time seconds;
no-local-switching;
no-mac-learning;
primary-vlan vlan-name;
vlan-id number;
vlan-range vlan-id-low-vlan-id-high;
}
}
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch on page 1525
Example: Setting Up Bridging with Multiple VLANs for EX Series Switches on page 1532
Example: Configure Automatic VLAN Administration Using GVRP on page 1549
Example: Connecting an Access Switch to a Distribution Switch on page 1540
Example: Setting Up Q-in-Q Tunneling on EX Series Switches on page 1568
Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches on page 1592
Creating a Private VLAN on a Single EX Series Switch (CLI Procedure) on page 1607
Understanding Q-in-Q Tunneling on EX Series Switches on page 1514
Copyright © 2010, Juniper Networks, Inc.