Show System Firmware; Table 61: Show System Firmware Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show system firmware

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show system firmware show system firmware
show system firmware
compatibility
Copyright © 2010, Juniper Networks, Inc.
show system firmware
<compatibility>
Command introduced in Junos OS Release 7.4.
Command introduced in Junos OS Release 9.4 for EX Series switches.
(J Series routers and EX8200 switches only) Display firmware information.
compatibility —(Optional) Display firmware compatibility information.
view
show system firmware on page 309
show system firmware compatibility on page 309
Table 61 on page 309 lists the output fields for the show system firmware command.
Output fields are listed in the approximate order in which they appear.

Table 61: show system firmware Output Fields

Field Name
Part
Type
Tag
Current version
Available version
Status
Action
user@host> show system firmware
Part Type
FPC 0 ROM Monitor 0
Routing Engine 0 RE BIOS
user@host> show system firmware compatibility
Part Type
Chapter 17: Operational Commands for System Setup
Field Description
Physical part on the router or switch affected by the firmware.
Type of firmware on the router or switch.
Location of the firmware on the interface.
Firmware version on the affected router or switch parts.
New versions of firmware for upgrading or downgrading.
Firmware condition on the router or switch.
Whether you can upgrade or downgrade, or if no action is available
( ).
none
Tag Current Available Status
version version
0 6.4.10
0 0
Tag Current Available Action
version version
OK
OK
309