Chapter 12 Using The Configuration Tools; Using The Cli Terminal - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

CHAPTER 12
Using the Configuration Tools

Using the CLI Terminal

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Using the CLI Terminal on page 157
Starting the J-Web Interface on page 158
The J-Web CLI terminal provides access to the Junos OS command-line interface (CLI)
through the J-Web interface. The functionality and behavior of the CLI available through
the CLI terminal page is the same as that of the Junos OS CLI available through the switch
console. The CLI terminal supports all CLI commands and other features such as CLI
help and autocompletion. Using the CLI terminal page you can fully configure, monitor,
and manage the switch.
Before you can use the CLI terminal, you must configure the domain name and
hostname of the switch. See "Configuring System Identity for an EX Series Switch
(J-Web Procedure)" on page 206 for more information.
To access the CLI through the J-Web interface, your management device requires the
following features:
SSH access—Enable Secure shell (SSH) on your system. SSH provides a secured
method of logging in to the switch, to encrypt traffic so that it is not intercepted. If
SSH is not enabled on the system, the CLI terminal page displays an error.
Java applet support—Make sure that your Web browser supports Java applets.
JRE installed on the client—Install Java Runtime Environment (JRE) version 1.4 or
later on your system. JRE is a software package that must be installed on a system
to run Java applications. Download the latest JRE version from the Java Software
website http://www.java.com/
installed, load automatically and transparently to render Java applets.
NOTE: The CLI terminal is supported on JRE version 1.4 and later only.
To access the CLI terminal, select
CLI User Interface Overview on page 149
. Installing JRE installs Java plug-ins, which once
Troubleshoot >CLI Terminal
.
157