Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 891

show chassis led
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show chassis led
<fpc-slot <fpc-slot-number>>
Command introduced in Junos OS Release 10.1 for EX Series switches.
Display the status and colors of the chassis LEDs on the front of the switch. A major alarm
(red) indicates a critical error condition that requires immediate action. A minor alarm
(yellow) indicates a noncritical condition that requires monitoring or maintenance. A
minor alarm that is left unchecked might cause interruption in service or performance
degradation.
—Display the status of the chassis status LEDs (for EX4200 switches configured as
none
a Virtual Chassis, display the information for all Virtual Chassis members).
fpc-slot <fpc-slot-number> —(Optional) (Not on EX2200 switches) Display the information
as follows:
For the EX3200, the standalone EX4200, or the EX4500 switch (
equals 0)
For all EX4200 switches in a Virtual Chassis (
value specified)
For a specific Virtual Chassis member (
For the line card in the specified slot on an EX8200 switch (
slot number)
view
Chassis Status LEDs in EX2200 Switches
Chassis Status LEDs in EX3200 Switches
Chassis Status LEDs in EX4200 Switches
Chassis Status LEDs in EX4500 Switches
Chassis Status LEDs in an EX8200 Switch
Table 135 on page 788 lists the output fields for the
fields are listed in the approximate order in which they appear.
Chapter 36: Operational Commands for System Monitoring
with no
fpc-slot
equals member ID value)
fpc-slot-number
fpc-slot-number
show chassis led
fpc-slot-number
fpc-slot-number
equals
command. Output
787