Show Chassis Firmware - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show chassis firmware

Syntax
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
Required Privilege
Level
Copyright © 2010, Juniper Networks, Inc.
show chassis firmware
show chassis firmware
<lcc number | scc>
show chassis firmware
<lcc number | sfc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.4 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Command introduced for EX8200 switches in Junos OS Release 10.2 for EX Series
switches.
On the routers, display the version levels of the firmware running on the System Control
Board (SCB), Switching and Forwarding Module (SFM), System and Switch Board (SSB),
Forwarding Engine Board (FEB), and Flexible PIC Concentrators (FPCs). On a TX Matrix
Plus router, display the version levels of the firmware running on the FPCs and the Switch
Processor Mezzanine Board (SPMBs).
On EX2200, EX3200, and EX4200 switches, display the version levels of the firmware
running on the switch. On an EX8208 switch, display the version levels of the firmware
running on the Switch Fabric and Routing Engine (SRE) modules and on the line cards
(shown as FPCs). On an EX8216 switch, display the version levels of the firmware running
on the Routing Engine (RE) modules and on the line cards (shown as FPCs).
none —Display the version levels of the firmware running. For an EX4200 switch that is a
member of a Virtual Chassis, display version levels for all members. For a TX Matrix
router, display version levels for the firmware on the TX Matrix router and on all the
T640 routers connected to the TX Matrix router. For a TX Matrix Plus router, display
version levels for the firmware on the TX Matrix Plus router and on all the T1600
routers connected to the TX Matrix Plus router.
lcc number —(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display version levels for the firmware on a specified T640 router (or line-card
chassis) that is connected to the TX Matrix router. On a TX Matrix Plus router, display
the version levels for the firmware on a specified T1600 router (or line-card chassis)
that is connected to the TX Matrix Plus router. Replace
through .
3
—(TX Matrix router only) (Optional) Display version levels for the firmware on the TX
scc
Matrix router (or switch-card chassis).
sfc number —(TX Matrix Plus router only) (Optional) Display version levels for the firmware
on the TX Matrix Plus router (or switch-fabric chassis). Replace
view
Chapter 17: Operational Commands for System Setup
with a value from
number
number
0
with .
0
289