No Spanning-Tree Forward-Time; Spanning-Tree Hello-Time; No Spanning-Tree Hello-Time; Spanning-Tree Max-Age - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

no spanning-tree forward-time

This command sets the Bridge Forward Delay parameter for the common and internal spanning
tree to the default value, i.e. 15.
Format
Mode

spanning-tree hello-time

This command sets the Hello Time parameter to a new value for the common and internal
spanning tree. The hellotime <value> is in whole seconds within a range of 1 to 10 with the value
being less than or equal to "(Bridge Max Age / 2) - 1".
Default
Format
Mode

no spanning-tree hello-time

This command sets the Hello Time parameter for the common and internal spanning tree to the
default value, i.e. 2.
Format
Mode

spanning-tree max-age

This command sets the Bridge Max Age parameter to a new value for the common and internal
spanning tree. The max-age value is in seconds within a range of 6 to 40, with the value being less
than or equal to "2 times (Bridge Forward Delay - 1)".
Default
Format
Mode
8-84
no spanning-tree forward-time
Global Config
2
spanning-tree hello-time <1-10>
Global Config
no spanning-tree hello-time
Global Config
20
spanning-tree max-age <6-40>
Global Config
202-10009-01_060204
Switching Commands