Table of Contents
Advertisement
C
HAP T ER
This chapter provides information about the NXC's logs.
When the system log reaches the maximum number of log messages, new log
messages automatically overwrite existing log messages, starting with the
oldest existing log message first.
See the User's Guide for the maximum number of system log messages in the NXC.
35.1 Log Commands Summary
The following table describes the values required for many log commands. Other values are
discussed with the corresponding commands.
Table 117 Input Values for Log Commands
LABEL
module_name
ap_mac
pri
ipv4
service
keyword
log_proto_accept
config_interface
The following sections list the logging commands.
NXC CLI Reference Guide
DESCRIPTION
The name of the category;
kernel
includes debugging messages generated by open source software. The
all
category includes all messages in all categories.
The Ethernet MAC address for the specified Access Point.
The log priority. Enter one of the following values: alert, crit, debug, emerg,
error, info, notice, or warn.
The standard version 4 IP address (such as 192.168.1.1).
The service object name.
The keyword search string. You may use up to 63 alphanumeric characters.
The log protocol. Enter one of the following values: icmp, tcp, udp, or others.
The interface name. Enter up to 15 alphanumeric characters, including
hyphens and underscores.
35
Logs
,
syslog
, .... The
default
category
219
Advertisement
Table of Contents
