Quick Programming Mode - Omron VARISPEED E7 User Manual

Example Operations with LCD Operator
Fig 3.7 shows mode transition examples with the LCD digital operator.
Display at Startup
-DRIVE-
Frequency Ref
U1- 01=60.00Hz
U1-02= 60.00Hz
U1-03= 10.05A
Mode Selection
MENU
Display
-DRIVE-
** Main Menu **
Operation
MENU
-QUICK-
** Main Menu **
Quick Setting
MENU
-ADV-
** Main Menu **
Programming
MENU
-VERIFY-
** Main Menu **
Modified Consts
MENU
-A.TUNE-
** Main Menu **
Auto-Tuning
Fig 3.7 Operations in Drive Mode with LCD Digital Operator
To run the Inverter after viewing/changing parameters press the MENU key and the DATA/ENTER key
in sequence to enter the Drive mode. A Run command is not accepted as long as the Inverter in any other
display.
IMPORTANT
To enable Run commands from other sources during programming set parameter b1-08 to "1".

Quick Programming Mode

In Quick Programming Mode, the basic parameters required for Inverter trial operation can be monitored and
set.
The parameters can be changed in the setting displays. Use the Increment, Decrement and Shift/RESET keys
to change the settings. The setting will be saved and the display will return to the monitor display when the
DATA/Enter key is pressed.
Refer to Chapter 5, User Parameters
Rdy
Monitor Display
A B
-DRIVE- Rdy
Monitor
RESET
U1 - 01=60.00Hz
U1-02= 60.00Hz
U1-03= 10.05A
ESC
ESC
-DRIVE- Rdy
Monitor
RESET
U1
- 02=60.00Hz
U1-03= 10.05A
U1-06= 203.5VAC
ESC
-DRIVE- Rdy
RESET
Monitor
=13.17%
U1 - 53
U1-01= 60.00Hz
U1-02= 60.00Hz
ESC
-DRIVE- Rdy
Fault Trace
RESET
U2 - 01= None
U2-02= OC
U2-03= 60.00Hz
ESC
-DRIVE- Rdy
Fault Trace
RESET
U2 - 02= OC
U2-03= 60.00Hz
U2-04= 60.00Hz
ESC
-DRIVE-
Rdy
Fault History
RESET
U3 - 01 = OC
U3-02= OV
U3-03= OH
ESC
-DRIVE- Rdy
RESET
Fault History
U3 - 02 = OV
U3-03= OH
U3-04= UV
ESC
A B
for details on the parameters displayed in Quick Programming Mode.
Frequency Setting Display
1 2
-DRIVE-
-DRIVE- Rdy
Frequency Ref
Frequency Ref
U1 - 01
=60.00Hz U1- 01= 60.00Hz
0
(0.00 60.00) ~
U1-02= 60.00Hz
U1-03= 10.05A "0.00Hz"
ESC
The Frequency Setting
-DRIVE- Rdy Display will not be displayed
Output Freq
when an frequency
U1 - 02 =60.00Hz
reference source different
U1-03= 10.05A
U1-06= 203.5VAC
than the digital operator is
used.
-DRIVE- Rdy
PI Feedback 2
=13.17%
U1 - 53
U1-01= 60.00Hz
U1-02= 60.00Hz
1 2
3 4
-DRIVE- Rdy
Current Fault
U2 - 01= None
U2-02= OC
U2-03= 60.00Hz
-DRIVE- Rdy
Last Fault U2 - 02= OC
U2 - 02= OC
Over Current
U2-03= 60.00Hz
U2-04= 60.00Hz
ESC
3 4
5 6
-DRIVE- Rdy
Fault History
U3 - 01= OC
U3 - 01 = OC
Over Current
U3-02= OV
U3-03= OH
ESC
-DRIVE- Rdy
U3 - 02= OV
Fault History
U3 - 02 = OV
DC Bus Overvolt
U3-03= OH
U3-04= UV
ESC
5 6
Modes
Rdy
Rdy
Rdy
Rdy
3-9