User Parameter Tables; Setup Settings: A - Omron VARISPEED E7 User Manual

User Parameter Tables

Setup Settings: A

Initialize Mode: A1
Param-
eter
Number
Language selec-
A1-00 tion for Digital
Operator display
Parameter access
A1-01
level
A1-03 Initialize
A1-04 Password
A1-05 Password setting
5-6
Name Description
Used to select the language dis-
played on the LCD or HOA Digital
Operator only.
0: English
2: German
3: French
4: Italian
5: Spanish
6: Portuguese
This parameter is not changed by
the initialize operation.
Used to set the parameter access
level (set/read.)
0: Monitoring only (Monitoring
drive mode and setting A1-01
and A1-04.)
1: Used to select user parameter
(Only parameters set in A2-01
to A2-32 can be read and set.)
2: Advanced
(Parameters can be read and set
in both, quick programming
mode (Q) and advanced pro-
gramming (A) mode.)
Used to initialize the parameters
using the specified method.
0: No initializing
1110:Initializes using the user
parameters that have been
stored before using o2-03 para-
meter
2220:Initializes using a two-wire
sequence. (Initializes to the fac-
tory setting.)
3330:Initializes using a three-wire
sequence.
Password input when a password
has been set in A1-05.
This function write-protects
parameters of the initialize mode.
If the password is changed, A1-01
to A1-03 and A2-01 to A2-32
parameters can only be changed
after inputting the right password.
Used to set a four digit number as
the password.
Usually this parameter is not dis-
played. When the password (A1-
04) is displayed, hold down the
RESET key and press the Menu
key and A1-05 will be displayed.
Change
Setting Factory during Access
Range Setting Opera- Level
tion
0 to 6 0 Yes A
0 to 2 2 Yes A
0 to
0 No A
3330
0 to
0 No A
9999
0 to
0 No A
9999
MEMO-
BUS Page
Register
100H –
101H 6-117
103H –
104H 6-117
105H 6-117