*1. The initial settings for C6-02 are as follows: 2: 5.0 kHz, 3: 8.0 kHz, 4: 10 kHz, 5: 12.5 kHz, and 6: 15 kHz. If the carrier
frequency is set higher than the factory setting for Inverters with outputs of 30 kW or more, the Inverter rated current will
need to be reduced.
400 V Class Inverters in Protection Class IP54
Parame-
ter Num-
Name
ber
–
Inverter Capacity
o2-04
kVA selection
b8-04
Energy-saving coefficient
C6-02
Carrier frequency selection
E2-01
Motor rated current
E2-03
Motor no-load current
E2-05
Motor line-to-line resistance
Momentary power loss ride
L2-02
through time
L2-03
Min. baseblock (BB) time
L2-04
Voltage recovery time
L8-02
Overheat pre-alarm level
L8-06
Input phase loss detection
*1. The initial settings for C6-02 are as follows: 2: 5.0 kHz, 3: 8.0 kHz, 4: 10 kHz, 5: 12.5 kHz, and 6: 15 kHz. If the carrier frequency is set higher than
the factory setting for Inverters with outputs of 30 kW or more, the Inverter rated current will need to be reduced.