Omron VARISPEED E7 User Manual page 101

Parameter
Class
Number
L3-02
L3-04
*1. Values for 200 V class Inverters are shown. For a 400 V class Inverter the values have to be doubled.
*2. The setting range is 10% to 200% of the Inverter rated output current. The value for a 200 V class Inverter of 0.4 kW is given.
*3. The factory setting depends on the Inverter capacity. The value for a 200 V class Inverter of 0.4 kW is given
4-6
Table 4.1 Basic Parameter Settings
Name
Stall prevention Sets the stall prevention level (current
selection during limit) during acceleration as a percentage
acceleration of the Inverter rated current.
If using the dynamic brake option (Brak-
Stall prevention
ing Resistor Units and Braking Units), be
selection during
sure to set parameter L3-04 to 0 (dis-
deceleration
abled).
Description
0 to 200%
: Must be set. : Set as required.
Setting Factory
Page
Range Setting
120% 6-17
0 to 2 1 6-19