Switching Modes
The mode selection display will appear when the MENU key is pressed from any other operator display. Press
the MENU key to switch between the different modes.
When the DATA/ENTER key is pressed the monitor display is entered. Depending on the entered menu the
monitor data or parameters are displayed.
Example Operations with LED Digital Operator
Fig 3.4
shows the mode transition appearance with the LED digital operator.
3-6
Mode Selection Display
MENU
Drive Mode
ESC
MENU
Quick Programming Mode
ESC
MENU
Advanced Programming Mode
ESC
MENU
Verify Mode
ESC
MENU
Autotuning Mode
ESC
Lit Up
Blinking
Fig 3.4 Mode Transitions with LED Digital Operator
Monitor Display
Setting Display
Power ON
(Operation
possible)
ESC
ESC
ESC
Not lit up