Modes; Inverter Modes - Omron VARISPEED E7 User Manual

Modes

This section describes the Inverter's modes and switching between modes.

Inverter Modes

The Inverter's user parameters and monitoring functions are organized in groups called modes that make it
easier to read and set user parameters. The Inverter is equipped with 5 modes.
The 5 modes and their primary functions are shown in the
Mode
Drive mode
Quick programming mode
Advanced programming mode
Verify mode
Autotuning mode
Table
Table 3.2 Modes
The Inverter can be run in this mode.
Use this mode for monitoring values such as frequency references or output current,
displaying fault information and the fault history.
Use this mode to read and set the basic user parameters to operate the Inverter.
Use this mode to reference and set all user parameters.
Use this mode to read/set user parameters that have been changed from their fac-
tory-set values.
Use this mode when running a motor with unknown motor parameters. During
Autotuning the line-to-line resistance is measured and set automatically.
3.2.
Primary function(s)
Modes
3-5