Omron VARISPEED E7 User Manual page 271

Storing Inverter set values in the Digital Operator (READ)
To store Inverter set values in the Digital Operator use the following method.
Step
No.
1
2
3
4
5
6
7
If a fault is displayed press any key to clear the fault display and return to the o3-01 display. Fault displays and
their meanings are shown below.
Select READ Prohibited
This function prevents overwriting of the data that are stored in the EEPROM of the Digital Operator. When
o3-02 is set to 0 and o3-01 is set to 1 to perform a write operation PrE will be displayed on the Digital Opera-
tor and the write operation will be stopped.
If it is safe to overwrite the parameter set stored in the Digital Operator set o3-02 to 1 and start the READ
function again by setting o3-01 to 1.
6-114
Digital Operator Display
LED Digital Operator LCD/HOA Digital Operator
-ADV-
** Main Menu **
Press the MENU key until the Advanced Pro-
gramming Mode is reached.
Programming
-ADV-
Press the DATA/ENTER key to enter the Func-
Initialization
tion Selection Display in Advanced Program-
A1 - 00=1
ming Mode.
Select Language
-ADV-
Scroll to parameter o3-01 (Copy Function
COPY Function
Selection) using the Increment key and Decre-
o3 - 01=0
ment key.
Copy Funtion Sel
-ADV-
Copy Function Sel
Press the DATA/ENTER key to enter the
o3-01= 0
*0* Parameter Setting Display.
COPY SELECT
-ADV-
Copy Function Sel
Change the set value to 1 using the Increment
o3-01=
1
*0* key.
INV OP READ
-ADV-
READ
Press the DATA/ENTER key. The READ func-
INV OP READING
tion will start.
-ADV-
READ
When the READ function is completed "End"
READ COMPLETE
respectively "Read Complete" is displayed on
the Digital Operator for appr. 1 second. Then
the display returns to the Monitor Display and
-ADV-
Copy Function Sel
parameter o1-03 is automatically reset to 0.
o3 - 01=0
*0*
COPY SELECT
Explanation