Table of Contents
Advertisement
3
SYSTEM CONFIGURATION
The FPGA module has the following two modes. An image of the system configuration to be used in each mode is shown.
• Standalone mode
• CC-Link IE TSN communication mode
System configuration in standalone mode
In standalone mode, the system can be controlled only by the FPGA module by setting parameters in advance using the
FPGA Module Configuration Tool.
Not connected with other communication devices
Also, in standalone mode, by connecting an SLMP-compatible device, the operation of the FPGA module can be controlled by
SLMP commands.
Engineering tool
(GXWorks3)
When controlling the FPGA module using the CPU module, the simple CPU communication function can be
used to send and receive SLMP commands to and from the FPGA module. For details on SLMP commands,
refer to the following.
Page 351 SLMP Communication Function
■Network configuration in standalone mode
The star connection is the only connection method that can be used in standalone mode.
Camera shutter
Sensor input (trigger)
Encoder input
SLMP
CPU module
SLMP-compatible
Ethernet device
TSN HUB
FPGA module
3 SYSTEM CONFIGURATION
3
23
Advertisement
Table of Contents
Troubleshooting
