System Update - Nortel 2340 Installation Manual

42 Software Installation of WLAN Location Engine 2340

System Update

For Nortel WLAN Location Engine 2340, that requires a System Update, do the following:
1
Connect to the WLE2340 Administration GUI using the URL:
https://<WLE2340_IP_Address>:8003
2
Select the File>System Update. The System Update wizard appears.
System Updates are distributed in binary format.
3
Click Browser. Select the binary image to upload.
4
Click OK.
Note.
While updating the file, if it encounters any problem, then the interface will indicate that
and reverts it to the current system..
Click 'Browse...' to select the binary image to upload, and then click 'OK' to start the System Update process. A dialog
box indicating that the upload is underway appears.
If there is a problem with the update, the option to revert is available upon reboot without finalizing the update.
Otherwise the following System Update status messages appears:
• Image Uploaded
• Extracting
• System Rebooting / System Rebooted
NN47250-306 (324121-A Version 01.01)