How To Mount A Module On A Din Rail - Mitsubishi Electric NZ2GN2S-D41P01 User Manual

How to mount a module on a DIN rail

The method for fixing the DIN rail stopper is an example. Fix the module in accordance with the manual for the
DIN rail stopper used.
Mount procedure
1.
Pull down all DIN rail hooks on the back of
the module until they click.
2.
Hang the upper tabs of the module on the
DIN rail, and push the module in position.
3.
Lock the DIN rail hooks to the DIN rail to
secure the module in position. Push each
hook upward until it clicks. If the hooks are
beyond the reach, use a tool such as a
screwdriver.
4.
Loosen the screw on the DIN rail stopper.
5.
Hang the bottom hook of the stopper to the
bottom of the DIN rail. Do not place the
stopper upside down. Place it correctly by
checking the arrow on the front of the
stopper and referring to the figure on the
left.
7 INSTALLATION AND WIRING
7
63
7.3 Installation