Chapter 4 Part Names - Mitsubishi Electric NZ2GN2S-D41P01 User Manual

4
PART NAMES
This chapter describes the part names of the FPGA module.
Main module
(13)
Extension module
(8)
(10)
(8)
No. Name
(1) P1
P2
(2) IP address/station
number setting switch
(3) Function setting switch
(4) Terminal block for
module power supply
and FG
(5) I/O terminal block
4 PART NAMES
28
(12)
(6)
(1)
(4)
(5)
(9)
Description
A port for the connection to a network. (RJ45 connector)
Connects an Ethernet cable. ( Page 68 Ethernet cables)
There are no restrictions on the connection order of the cables for P1 and P2.
The LEDs of the Ethernet ports are always off.
Same as P1
Sets the IP address fourth octet. ( Page 54 IP address/station number setting switch setting)
Sets the operation mode and the communication speed. ( Page 58 Setting the function setting switches)
A terminal block for the connection to module power supply (24VDC) and FG. ( Page 66 Wiring to terminal block for
module power supply and FG)
A terminal block for the connection to external devices. ( Page 70 Wiring to I/O terminal block)
(2) (3) (5)
(7)
(9)
(11)