Relevant Manuals; Terms - Mitsubishi Electric NZ2GN2S-D41P01 User Manual

RELEVANT MANUALS

For the latest e-Manual and manual PDF, please consult your local Mitsubishi representative.
Manual name [manual number]
CC-Link IE TSN FPGA Module User's Manual
[SH-082569ENG] (this manual)
e-Manual refers to the Mitsubishi Electric FA electronic book manuals that can be browsed using a dedicated
tool.
e-Manual has the following features:
• Required information can be cross-searched in multiple manuals.
• Other manuals can be accessed from the links in the manual.
• The hardware specifications of each part can be found from the product figures.
• Pages that users often browse can be bookmarked.
• Sample programs can be copied to an engineering tool.

TERMS

Unless otherwise specified, this manual uses the following terms.
Term
B0 to B2
*1
CC-Link IE TSN Class
Configuration
Configuration data
Configuration ROM
Cyclic transmission
Data link
Dedicated instruction
Device station
E0 to E2
Engineering tool
Extension module
FPGA development environment for the
CC-Link IE TSN FPGA module
FPGA development software
FPGA download
FPGA download cable
FPGA Module Configuration Tool
FPGA parameter
FPGA register
General-purpose hub
Link device
Link scan (link scan time)
Local station
14
Description
Part names, specifications, procedures before operation, system configuration,
installation, wiring, settings, FPGAs, functions, sample circuits, troubleshooting,
remote I/O signals, remote register, remote buffer memory, and FPGA register of
the FPGA module
Description
A terminal block or a circuit board of B0 to B2 for the main module
A group of devices and switching hubs compatible with CC-Link IE TSN, ranked according to the functions and
performance by the CC-Link Partner Association.
For CC-Link IE TSN Class, refer to the CC-Link IE TSN Installation Manual (BAP-C3007ENG-001) published by the
CC-Link Partner Association.
Operation of writing configuration data to the FPGA
Information of the FPGA circuits
A non-volatile memory that stores configuration data
A function by which data are periodically exchanged among stations on the same network using link devices
Communications performed by cyclic transmission and transient transmission
An instruction that simplifies programming for using functions of intelligent function modules
A station other than a master station: a local station, a remote station
A terminal block or a circuit board of E0 to E2 for the extension module
A tool used for setting up programmable controllers, programming, debugging, and maintenance
An FPGA module that cannot be used alone. The number of I/O points can be increased or analog I/O can be added
by connecting an extension module to the main module.
A set of data such as design environment (RTL), verification environment, and logic synthesis environment for the
FPGA module
Development software used for FPGA circuit design. Another name for Intel
Operation of writing configuration data to the FPGA or the configuration ROM
A cable to connect the JTAG connector of the FPGA module to the personal computer. Access to the FPGA module
from the personal computer is possible by using FPGA development software. The FPGA download cable is another

name for Intel FPGA Download Cable  (former name: USB-Blaster
A tool to set the parameters of the FPGA module or perform the FPGA download
A parameter to change the operation of the FPGA
A register for the standard circuits and the user circuit
A CC-Link IE TSN Class A switching hub authorized by CC-Link Partner Association
A device (RX, RY, RWr, or RWw) in an FPGA module
Time required for all the stations on the network to transmit data.
The link scan time depends on data volume and the number of transient transmission requests.
A station that performs cyclic transmission and transient transmission with the master station and other local stations
Available form
Print book
e-Manual
PDF

Quartus Prime.

).