Table of Contents
Advertisement
FPGA parameters
Set the FPGA parameters.
• The items that can be set differ depending on the module selected.
• The E0 terminal block, E1 terminal block, and E2 terminal block can be set when an Extension module is
connected. Masked if no Extension module is connected.
• By selecting the setting value on the Work window and selecting the initialization menu by right-clicking, the
setting value can be initialized.
Operating procedure
1.
Do it from "FPGA parameter".
[Menu] [FPGA parameter]
Ex.
For NZ2GN2S-D41P01
8 FPGA MODULE CONFIGURATION TOOL
98
8.6 Parameter Setting Function
Advertisement
Table of Contents
Troubleshooting
