8
FPGA MODULE CONFIGURATION TOOL
This chapter describes the FPGA Module Configuration Tool used to write to the FPGA module.
For the FPGA Module Configuration Tool, please consult your local Mitsubishi representative.
8.1
Starting Up and Finishing
When using CC-Link IE TSN communication mode
The following describes the startup method when using CC-Link IE TSN communication mode.
Operating procedure
1.
Display the CC-Link IE TSN Configuration window and double-click the target module.
2.
The FPGA Module Configuration Tool will start.
8 FPGA MODULE CONFIGURATION TOOL
86
8.1 Starting Up and Finishing