6.2.2
This section describes a procedure for mounting the modules on a DIN rail.
The method for fixing the DIN rail stopper is an example. Fix the module in accordance with the manual for the DIN rail
stopper used.
(1) Mounting procedure
40
Downloaded from
ManualsNet.com
Mounting the modules on a DIN rail
search engine
1.
Pull down all DIN rail hooks on the back of the
modules.
Pull the hooks down until they click.
2.
Hang the upper tabs of the modules on a DIN rail,
and push the modules in position.
3.
Lock the DIN rail hooks to the DIN rail to secure the
modules in position.
Pull the hooks up until they click.
If the hooks are beyond the reach, use a tool such as a
driver.
4.
Loosen the screw of the DIN rail stopper.