Examination For Installing Method In Enclosure; Procedures For Installing On And Detaching From Din Rail; Preparation For Installation - Mitsubishi Electric MELSEC iQ-F Series User Manual

5.2

Examination for Installing Method in Enclosure

Examine the installation location of PLC considering the environmental conditions (
When extension cables are used for the connection, install the products keeping a space of about 2
mm (0.08") between them.
Installing on DIN rail
• The PLC can be installed on a DIN46277 rail (35 mm (1.38") wide).
• The PLC can be easily moved and removed.
• The PLC installation height is the same as the DIN rail.
For details on the procedures for installing on and detaching from DIN rail, refer to Page 44 Procedures for Installing on
and Detaching from DIN Rail.
■Example of installation
FX5UC-32MT/D FX5-C32EX FX5-CNV-IFC FX5-16EX FX5-16EYT
DIN rail
5.3
Procedures for Installing on and Detaching
from DIN Rail
The CPU module can be installed on a DIN46277 rail (35 mm (1.38") wide).

Preparation for installation

Connecting extension devices
Some extension devices must be mounted on the CPU module before the module is installed in the enclosure.
• Connect expansion adapters or extension modules (extension connector type) on the CPU module before mounting the
PLC in the enclosure.
• Mount extension modules (extension cable type) or terminal modules in the enclosure after mounting the CPU module in
the enclosure.
• Mount (replace) a battery before mounting the CPU module.
Affixing the dust proof sheet
The dust proof sheet should be affixed to the ventilation slits before beginning the installation and wiring
work. For the affixing procedure, refer to the instructions on the dust proof sheet.
Always remove the dust proof sheet when the installation and wiring work is completed.
5 INSTALLATION
44
5.2 Examination for Installing Method in Enclosure
2 mm (0.08")
Page 17 Generic Specifications).