How To Write Via Ethernet - Mitsubishi Electric NZ2GN2S-D41P01 User Manual

How to write via Ethernet

In this method configuration data from the FPGA module configuration tool is written to the configuration ROM via Ethernet.
By connecting a personal computer to an available port on the same network as the FPGA module, downloading can be
performed to any FPGA module connected to the same network.
Application Software
used
Mass FPGA Module
production Configuration
Tool
Concerning the FPGA Module Configuration Tool, refer to the following.
Page 86 FPGA MODULE CONFIGURATION TOOL
System configuration
■For direct connection
FPGA Module
Configuration Tool
■For star connection with TSN hub
FPGA Module
Configuration Tool
File format Data retention
when power is
turned off
RPD Available
TSN HUB
Write Recommended
destination environment
Configuration ROM A noise-free
environment (such
as on a desk) and
inside a control
panel
Remarks
• Data can be retained even after
power-off.
• It is possible to write to multiple
FPGA modules on the same
network simply by changing the
IP address setting without
changing the connection cable
of the personal computer.
12 FUNCTIONS
12.3 FPGA Download Function
12
305