Table of Contents
Advertisement
Batch monitor display
Displays the contents of link devices, remote buffers, or FPGA register areas.
By manipulating cells on the grid, values can be changed and written.
Link devices (RX/RY) can only be monitored in units of 16 points, and FPGA register areas can only be
monitored in units of even numbers.
Operating procedure
1.
Displays the "Device/Register batch monitor" window.
[Menu] [Device/Register batch monitor]
2.
Select either Link device, Remote buffer, or FPGA register as the type to display.
3.
Enter the address to display.
8 FPGA MODULE CONFIGURATION TOOL
8.7 Online Functions
8
117
Advertisement
Table of Contents
Troubleshooting
