Table of Contents
Advertisement
12.8
FTP Client Function
Transfers logging data collected in DDR3L SDRAM to the FTP server.
Setting method
Use the FPGA Module Configuration Tool to set parameters. ( Page 98 FPGA parameters)
■Setting the transfer destination FTP server
Operating procedure
1.
Set the IP address of the destination FTP server in "FTP server IP address".
Set the FTP server IP address to the same IP address class as the FPGA module. Also, match the subnet
mask setting with the subnet mask of the FPGA module.
2.
Set the login name for the destination FTP server in "Login name".
3.
Set the password for the destination FTP server in "Password".
The connection method and connection port number are as follows.
Connection method: PORT
FTP server connection port number: 20, 21
4.
Specify the path (ASC) to the directory where the logging data file is to stored for "Directory path".
If the directory path is left blank, the logging data file will be transferred to the root directory of the FTP server.
If the directory specified in the directory path does not exist when transferring logging data, FTP file
generation abnormality (error code: 1403H) is stored in Latest error code (RWr0) and Error status flag (RXA)
turns on. Specify the directory delimiter / or \ at the end of the directory path. If not specified, / is automatically
added at the end.
Ex.
When saving to any folder on the FTP server
• Logging data file name: sample_20221031_171531_00000002.bin
• Directory path: /LOGGING/LOG1/
• Directory path and file name used for logging data transfer: /LOGGING/LOG1/sample_20221031_171531_00000002.bin
12 FUNCTIONS
340
12.8 FTP Client Function
Advertisement
Table of Contents
Troubleshooting
