Table of Contents
Advertisement
Checking by using CC-Link IE TSN/CC-Link IE Field diagnostics
Operating procedure
1.
Connect the engineering tool to the CPU module.
2.
Start CC-Link IE TSN/CC-Link IE Field diagnostics from the menu.
[Diagnostics] [CC-Link IE TSN/CC-Link IE Field Diagnostics]
3.
Right-click the device station and then select "Production Information" to display the production information.
4.
The production information appears.
■Checking with the "Station Information List" window
For how to check the production information, refer to the following.
Page 431 Checking station information
Checking the firmware version
Check the firmware version of FPGA module with the following.
• "Station Information List" window of CC-Link IE TSN/CC-Link IE Field Diagnostics
• CC-Link IE TSN Firmware Update Tool
• FPGA Module Configuration Tool
For an I/O module on which a firmware update has not been performed yet, the firmware version can be
checked with the production information. (The first two digits of production information show the firmware
version.)
Appendix 11 How to Check Production Information and Firmware Version
A
APPX
691
Advertisement
Table of Contents
Troubleshooting
