Extension Module - Mitsubishi Electric NZ2GN2S-D41P01 User Manual

Extension module

NZ2EX2S-D41P01, DC input/output: 96 points
Item
24VDC input specifications Number of points
Rated input voltage
Rated input current
Maximum number of simultaneous input
points
ON voltage/ON current
OFF voltage/OFF current
Input response time
Pulse input speed (maximum speed)
Wiring method for common
Filter time
5 to 24VDC output Number of points
specifications
Rated load voltage
Maximum load current
Maximum inrush current
Leakage current at OFF
Maximum voltage drop at ON
Output response time
Pulse output speed (maximum speed)
Surge suppressor
Protection function
Wiring method for common
Current consumption
Weight
*1 Consider that the constant amount of input current of 4.2mA TYP. (3 to 5mA) flows at power-on regardless of the input voltage, when
selecting connected devices and performing wiring. ( Page 75 Current flow in the DC input circuit)
*2 Page 204 Digital input control part (di2_top)
*3 For a device to be connected to the I/O part, use a SELV power supply that meets LIM or UL 1310 Class 2.
*4 The current consumption value is not described on the rating plate of the extension module because the maximum current consumption
value for when the main module is used with the extension module is described on the rating plate of the main module.
Specifications
48 points
*3
24VDC (Ripple ratio: within 5%) (Allowable voltage range: 20.4 to 28.8VDC)
4.2mA TYP. (for 24VDC)
48 points (100%)
11VDC or more/3mA or more and 5mA or less
5VDC or less/1.5mA or less
OFF  ON
1s or less
ON  OFF
1s or less
200kpps (200kHz)
4 points/common (positive/negative common shared type)
0s to 2683.6992ms
48 points
*3
5/12/24VDC (4.75 to 28.8VDC)
0.1A/point
0.4A, 10ms or less
0.1mA or less
0.5VDC (maximum), 0.1A
OFF  ON
1s or less
ON  OFF
1s or less (rated load, resistive load)
200kpps (200kHz)
Zener diode
Not available
4 points/common (sink type)
*4
70mA
0.39kg
*1
*1
*2
5 SPECIFICATIONS
5.2 Performance Specifications
5
41