Fiber Remote Multi-Ipe Interface Units Connection Diagrams - Nortel Communication Server 1000 Series Manual

150 Peripheral Controller HEX codes and cable connection diagrams
Table 30
Peripheral Controller self-test HEX codes (cont'd.)

Fiber Remote Multi-IPE Interface units connection diagrams

The following figures illustrate the connection of the local system to the
Fiber Remote Multi-IPE Interface units and the fiber-optic link at the local
and the remote sites.
The following three figures represent examples of connections at the local
and corresponding remote site. These connections represent the following:
•
Copyright © 2007-2009 Nortel Networks
.
HEX code Test description
0F A31 #1 internal TXVM memory
10 A31 #1 configuration memory
11
A31 #1 external FIFO
12 A31 #2 external buffer
13 A31 #2 internal context memory (phase A)
14
A31 #2 internal context memory (phase B)
15 A31 #2 internal TXVM memory
16 A31 #2 configuration memory
17
A31 #2 external FIFO
18 R72 N-P switching control memory
19 R72 320x8 NIVD buffer
1A R72 N-P Quiet code register
1B R72 P-N switching control memory
1C R72 640-8 XIVD buffer
1D R72 640-8 XIVD loopback buffer test
1E R72 P-N Quiet code register
1F R71 register test
20
R71 continuity test, peripheral side
21 R71 continuity test, network side
22 R71 packet transmission test
23
Interrupt test
24 R71 continuity test, peripheral side DS30X
Figure 15 "Local site single Fiber Remote Multi-IPE Interface unit
cable connection diagram" (page 152)
Network cards, including:
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009
shows a network of Superloop