Nortel Communication Server 1000 Series Manual page 63

6
7
8
Figure 10 "System monitor daisy-chain connections at the local site" (page
63)
Fiber Remote Multi-IPE Interface units at the local site.
Figure 10
System monitor daisy-chain connections at the local site
Copyright © 2007-2009 Nortel Networks
.
Plug the other end of the NT8D46AL cable 6-pin modular plug
into the third Fiber Remote Multi-IPE Interface unit 6-pin modular
jack XSM IN (J5).
Repeat steps 5 and 6 for any additional Fiber Remote Multi-IPE
Interface unit.
The XSM OUT (J6) in the last Fiber Remote Multi-IPE Interface
unit in the daisy-chain connects to the J5 of the slave system
monitor in the co-located IPE Module when this system monitor
is outbound from the last Fiber Remote Multi-IPE Interface unit
in the chain, as shown in
connections at the local site" (page
illustrates the system monitor daisy-chain connections for multiple
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009
Fiber-optic equipment installation 63
Figure 10 "System monitor daisy-chain
63).
--End--