Nortel Communication Server 1000 Series Manual page 102

102 Installation and configuration
Table 26
MMI commands used in displaying, checking, and setting the fiber-optic
parameters (cont'd.)
Command
L xx
Q
S A
S C
S D
S L
S N
S T
T A
T FI
T SL
T SL D
@@@
Copyright © 2007-2009 Nortel Networks
.
Description
Log in to a specific superloop when the system has
more than one Fiber Remote Multi-IPE Interface
connected in a daisy-chain, where xx is the Fiber
Remote Multi-IPE Interface address in the chain. The
password is also FIBER. Enter password in all capital
letters.
Logs the terminal user out.
Set link bit error per minute alarm threshold.
Set alarm self-clearing function to either "enable" or
"disable".
Set date or verify current date.
Sets link. Configures which fiber-optic link (A or B) is
selected to transmit data.
Set name. Sets the name for the site and superloop
number and shelf number. The site name can be 9
characters long and the superloop number can be 3
characters long and shelf can be one to two characters
long.
Set time or verify current time.
Test all. Initiates a series of pre-programmed tests on
the near-end and far-end superloops and fiber-optic
links.
Test duration can be set from 1 to 98 minutes. By
entering 0, the tests run one time. To stop testing,
enter STOP.
Test fiber. Initiates a series of pre-programmed tests
on the fiber-optic links. Test duration can be set from 1
to 98 minutes. By entering 0, the tests run one time.
To stop testing, enter STOP.
Test near-end superloop. Initiates a series of
pre-programmed tests on the near-end superloops.
Test duration can be set from 1 to 98 minutes. By
entering 0, the tests run one time. To stop testing,
enter STOP.
Test far-end superloop. Initiates a series of
pre-programmed tests on the far-end superloops. Test
duration can be set from 1 to 98 minutes. By entering
0, the tests run one time. To stop testing, enter STOP.
Terminates the terminal connection.
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009