Nortel Communication Server 1000 Series Manual page 18

18 Product description
Table 3
Equipment required to link local system to Remote IPE sites (cont'd.)
Component
NT8D88AD
Network to I/O
Panel Cable
NT8D92AD
Controller to I/O
Panel Cable
NT8D93AJ XSDI
I/O to DTE or
DCE Cable
Figure 2 "Local system to Remote IPE connection over fiber-optic links"
(page 19)
fiber-optic cable over Fiber Remote Multi-IPE Interface units. Connections
between the local system and Fiber Remote Multi-IPE Interface units
depend on the number of superloops projected over the fiber-optic link to
the Remote IPE modules at one or more remote sites. This figure shows
two IPE Modules supported at the remote site. A maximum of four IPE
Modules can be supported using a pair of Fiber Remote Multi-IPE Interface
units.
Copyright © 2007-2009 Nortel Networks
.
Description
A 6-foot cable that connects Superloop Network card J1 or
J2 faceplate connectors to the network I/O panel.
A 20-inch cable that connects one of the IPE backplane
connectors SL0, SL1, SL2, or SL3 to the IPE I/O panel.
Connects the Paddleboard DB-9 female connector to the
adapter cable that connects to the Fiber Remote Multi-IPE
Interface unit.
illustrates a local system and Remote IPE equipment linked with
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009