Nortel Communication Server 1000 Series Manual page 16

16 Product description
Table 3 "Equipment required to link local system to Remote IPE sites"
(page 16)
to the Remote IPE external to the local column and Remote IPE modules.
All the equipment contained in the local column(s) as well as the
equipment contained in Remote IPE modules is standard equipment not
specifically designed to support the Fiber Remote Multi-IPE Interface and
the fiber-optic link.
Table 3
Equipment required to link local system to Remote IPE sites
Component
Fiber Remote
Multi–IPE
Interface Unit
Fiber Remote
Multi–IPE
Interface Unit
Fiber Remote
Multi–IPE
Interface Unit
Fiber Remote
Multi–IPE
Interface Unit
Fiber Remote Mu
lti–IPE Interface
Redundant Option
Fiber Remote Mu
lti–IPE Interface
Redundant Option
Fiber Remote
Multi–IPE
Rack-Mounted
Shelf
Local Fiber
Remote Multi-IPE
Interface Cable
Copyright © 2007-2009 Nortel Networks
.
module and blocking for the last four segments in the second IPE
module.
Note:
Each segment example in
configurations" (page 14)
Multi-IPE Interface units as shown in
Remote IPE connection over the fiber-optic link" (page
lists the equipment required to link the local network equipment
Description
Supports single-mode fiber-optic link for four superloops
at connector positions SUPERLOOP-1 through
SUPERLOOP-4.
Supports single-mode fiber-optic link for two superloops at
connector positions SUPERLOOP-1 and SUPERLOOP-2.
Supports multi-mode fiber-optic link for four superloops
at connector positions SUPERLOOP-1 through
SUPERLOOP-4.
Supports multi-mode fiber-optic link for two superloops at
connector positions SUPERLOOP-1 and SUPERLOOP-2.
A daughterboard with fiber-optic connectors that is installed
onto the motherboard to support single-mode redundant
fiber-optic link operation.
A daughterboard with fiber-optic connectors that is installed
onto the motherboard to support multi-mode redundant
fiber-optic link operation.
Supports up to six Fiber Remote Multi-IPE Interface units
per shelf. Used where several units are co-located to save
space.
Usually at the local site (Optional).
A 30 foot shielded cable connects the local network I/O
panel 24-pin Centronics connector to a Fiber Remote
Multi-IPE Interface unit SUPERLOOP 37-pin D Shell
connector.
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009
Table 2 "Superloop connection
is configured over a pair of Remote
Figure 1 "Local system to
13).