Nortel Communication Server 1000 Series Manual page 42

42 Installation and configuration
Pre-installation
Pre-installation procedures include:
•
•
•
•
•
Installation
Installation procedures include:
•
•
•
•
•
•
•
•
•
•
Copyright © 2007-2009 Nortel Networks
.
preparing the site
unpacking, inspecting, and taking inventory of the equipment
routing and splicing fiber-optic cables to create a fiber-optic link
between two sites, if it does not already exist
connecting the fiber-optic link to the Fiber Remote Multi-IPE Interface
at the local site and the Remote IPE site
selecting the local Superloop Network cards for connection to the Fiber
Remote Multi-IPE Interface
installing the Superloop Network cards in the selected network card
slot, if not already installed
installing the cables between the J1 and J2 faceplate connectors on
the Superloop Network cards and the network I/O panel connectors
at the rear of the network module
installing the cables between the SL0 through SL3 backplane
connectors on the Remote IPE module and the I/O panel connectors
at the rear of the module
configuring the Fiber Remote Multi-IPE Interface dip-switches and
installing the Fiber Remote Multi-IPE Interface unit onto the wall or in
the shelf
connecting the fiber-optic link to the Fiber Remote Multi-IPE Interface
fiber-optic ST-type connectors
connecting the external copper cables between the Fiber Remote
Multi-IPE Interface unit and local network I/O panel connectors.
connecting the master system monitor and MMI terminal cables at the
local site
connecting the external copper cables between the Fiber Remote
Multi-IPE Interface unit and the Remote IPE module I/O panel
connectors
connecting the slave system monitor and MMI terminal cables at the
remote site
connecting the fiber-optic link to the Fiber Remote Multi-IPE Interface
at the Remote IPE site
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009