Nortel Communication Server 1000 Series Manual page 101

Table 26 "MMI commands used in displaying, checking, and setting the
fiber-optic parameters" (page 101)
and configure carrier parameters such as setting alarm thresholds, setting
time and date, configuring fiber-optic links, connecting to the SDI port, and
testing the fiber-optic link and interfaces to the link.
Table 26
MMI commands used in displaying, checking, and setting the fiber-optic
parameters
Command
A D
A E
C A
D C [P]
D C D
D S [P]
D S D
H or ?
HOST or HO
L
Copyright © 2007-2009 Nortel Networks
.
Configuring the Fiber Remote Multi-IPE Interface unit 101
ID for Superloop 3012 2
ID for Superloop 4016 2
FII::> S T
Current Time 10:06:14 10:15:25
Current Time 10:15:25
FII::> S D
Current Date 8/10/9518/11/95
Current Date 8/11/95
Note:
Time and date should be set correctly to allow correlation of the
Remote IPE Alarm Log with error messages in the local History File.
Description
Alarm disable. Disables all alarms.
Alarm enable. Enables all alarms.
Clear alarm. Clears all alarms and resets the fiber-optic
link bit error rate counters.
Display configuration [Pause]. Displays current
near-end configuration such as time, date, name, and
link bit error threshold.
Display configuration distant. Displays current far-end
configuration such as time, date, name, and link bit
error threshold.
Display status [Pause]. Displays near-end superloop
and fiber-optic link status.
Display status distant. Displays far-end superloop and
fiber-optic link status.
Help. Displays the Help screen.
Connect the terminal to the SDI port. The password is
HOST. Enter password in all capital letters.
Log in to the MMI terminal for one Fiber Remote
Multi-IPE Interface. The password is FIBER.
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009
Superloop and shelf number
Superloop and shelf number
To set time
Enter correct time at the cursor, if
required.
To set date
Enter correct date at the cursor, if
required.
lists MMI commands used to display