Nortel Communication Server 1000 Series Manual page 111

Generating traffic reports
Use the system traffic report to identify calls made during acceptance
testing from the Remote IPE site and to the Remote IPE site.
To verify traffic generated during acceptance testing, use the following
command to print the report:
TOPS r r
The parameters for this command are:
r r are report options. This must be one or more of the following numbers:
For more information on traffic reports, refer to the Traffic control program
LD 02 in Software Input Output Administration (NN43001-611) () and
Traffic Measurement Format and Output Reference (NN43001-750 () .
Copyright © 2007-2009 Nortel Networks
.
1 = Network traffic report
2 = Service loops traffic report
5 = Selected terminals traffic report
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009
Performing acceptance testing 111